Tutorial Bootloader 1 error

If you are new to OS Development, plan on spending some time here first before going into the other forums.

Moderator:Moderators

Post Reply
Niedobo
Posts:1
Joined:Tue Sep 16, 2008 8:58 pm
Location:Denmark
Tutorial Bootloader 1 error

Post by Niedobo » Tue Sep 16, 2008 9:10 pm

Hi

I had a question that I hope someone can help me with. I had try to follow the tutorial 3: Bootloaders
But I had some problem.

Here is what I had done so far.
1: download the tools that I needed (partcopy, nasm,vfd)
2: copy the code from the tutorial to a boot1.asm file and compile it.
3: run the virtual floppy disk with success.
4: Now I try to use the partcopy command. But here I got a error 'divide error'?

Can someone tell what can be wrong here.

Maybe it's a stupid question, but can it had anything to do with that I'm running it on Vista?

Regards
Niedobo

abuashraf
Posts:7
Joined:Sat Aug 30, 2008 7:34 am

Post by abuashraf » Wed Sep 17, 2008 6:23 am

Hi,

take a look at this

Post Reply